|
|
Build Your Online Product Catalogs?
| Product Name: |
Output Module 22 120
|
| Supply Ability: |
|
| Related proudcts |
hiam module, |
| Specifications |
Planar F/4 |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Output Module 22 120
safety-related
output 25 V DC / 24 W
The module is TV tested according to DIN V 19250 for RC 1...7,
according to IEC 61508 for SIL 4 and EN 954-1 for Cat 4.
With control at the inputs the output d16-d18 carries a quasi controlled
voltage of approx. 25 V which can be loaded up to 24 W nominal (at a nominal
voltage of 24 V). It is electrically isolated from the supply voltage and
able to control directly inductive loads.
The switch S is used for a two-pole switching off of the output for purposes
of maintenance and repair. If only a single pole switching off is required,
the pin d16 can be connected with the pin z16.
The delivery state of the fuse F is 4 A time-lag. Normally the fuse does not
blow in case of a short circuit as the module output is short-circuit-proof.
The fuse is designed for the use as the specified back-up fuse for (Ex)d
type valves (flameproof enclosure) in the Ex area 1. The corresponding
value must be taken from the test certificate of the used solenoid valve.
Switching time approx. 4 ms
Reset time (z18/d18) approx. 12 ms at nominal load
Reset time (d10) approx. 7 ms
Operating data EL+ 24 V DC / 70 mA
Operating data LL+ 24 V DC / 1.4 A at nominal load,
min. fusing: 2 A time-lag
***ce requirement 3 U high, 4 SU |
| Company: |
Asia Science&Technology Co***ny Limited
|
| Contact: |
Mr. Ethan Wen |
| Address: |
Unit 04, 7/ F, Bright Way Tower,No. 33 Mong Kok Road, Kowloon, HK. |
| Postcode: |
|
| Tel: |
00852-27935511 |
| Fax: |
00852-35902333 |
| E-mail: |
|
|
|
|
Home
